Cult "Hawk" BMX Crank
-
Weight : 0.86kg / 1.9lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 9361
The Cult "Hawk" BMX Crank is a stable and classic 3-pc. crank made of 100% heat treated 4130 CrMo with 175mm long crank arms and a 48 spline hollow spindle with a diameter of 22mm. The crank arms of this Cult "Hawk" BMX Crank have a round shape with flattened outer sides and the areas of the axle, and the pedal recording are fully welded around to ensure maximum stability. Sprocket holes for regular, but also small sprockets (micro drive) on both crank arms offer you here a stable but also RHD/LHD compatible 3-pc. crank Set.
Facts: Cult "Hawk" BMX Crank
- Material Crank Arms: 4130 CrMo, heat treated
- Material Crank Spindle: 4130 CrMo, heat treated, hollow
- Crank-Type: 3-piece
- Crank Arm Length: 165mm, 170mm or 175mm
- Spindle Diameter: 22mm
- Spindle-Type: 48-Spline
- possible Sprocket Mount by:
Micro-Bolt-Drive (smaller then 25T): right (RHD) and left (LHD)
Bolt-Drive (25T or larger): right (RHD) and left (LHD)
Spline-Drive: right (RHD) and left (LHD) - Pedal Threat: for 9/16" pedals
- Spindle Bolt: 2x bolts (15x1mm) with 8mm allen key
- Sprocket Bolt: 1x bolt (10x1.5mm)(Standard)
- Extras: signature crank of Chase Hawk, completely surround welded axle and pedal jacks
- Recommended for: Street, Park, Trails or Flatland
