DMR "Wingbar Mk4" MTB Bars - Ø35mm
- Weight : 0.33kg / 0.73lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 35203
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/dmr-wingbar-mk4-mtb-bars-35mm-p-35203
Printed: 10/24/2026
Printed: 10/24/2026
The DMR "Wingbar Mk4" MTB Bars - Ø35mm is the fourth generation Wingbar, developed with Olly Wilkins. The tube is heat treated 7075 aluminium and double butted, so thinner at the ends than in the middle. With 8 degrees of backsweep and 5 degrees of upsweep the shape covers trail, singletrack and bike park alike. This version clamps at 35mm, is 800mm wide and has 35mm of rise.
Facts: DMR "Wingbar Mk4" MTB Bars - Ø35mm
- Material: Aluminum
- Bar-Design: 1-piece
- Geometry:
- Width: 31.5"
- Backsweep: 8°
- Upsweep: 5°
- Height: 35mm - Clamping: 35mm
- Recommended for: trail, enduro, bike park, MTB dirt
- Scope of Delivery: 1 piece
- Extras:
- 7075 aluminium, heat treated and double butted
- weight 326g (manufacturer figure)
