Praxis Works "MTN DM1X Steel" MTB Chainring - Direct Mount
- Weight : 0.16kg / 0.35lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 36890
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Praxis Works "MTN DM1X Steel" MTB Chainring - Direct Mount is the steel version of the Praxis Works direct mount chainring for cranks with the 3-bolt interface. Cold forged from case hardened steel and black oxide finished, it lasts considerably longer than an aluminium ring. Narrow-wide tooth profile, 0mm offset.
Facts: Praxis Works "MTN DM1X Steel" MTB Chainring - Direct Mount
- Style: 1x chainring, narrow-wide tooth profile, 0mm offset
- Material: case hardened steel, cold forged, black oxide finish
- Teeth: 32T
- Chainring Mount: Direct Mount (SRAM 3-Bolt)
- Chain Compatibility: 10, 11 and 12 speed (KMC, Shimano, SRAM Eagle, Flattop and T-Type)
- Contains: 1 chainring
- Extras:
- narrow-wide tooth profile, keeps the chain without a guide
- steel for a long service life
- chainline on second generation Praxis cranks 55mm, on first generation cranks and SRAM 3-bolt 52mm
- for mechanical and electronic Shimano and SRAM drivetrains
- clutch rear derailleur (Shimano Shadow, SRAM Type 2) recommended
- weight 155g (32T)
