Enduro Bearings "Double Row BB86/92 Stainless" MTB Bottom Bracket
-
Weight : 0.12kg / 0.26lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 40056
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "Double Row BB86/92 Stainless" MTB Bottom Bracket is a press fit solution for BB86/92 frames: double row flanged bearings press directly into the 41 mm shell, so a thick crank spindle fits despite the tight bore, and twice the number of balls per side gives a long service life. Balls and races are 440C stainless steel. It fits BB86/BB92 press fit shells and in this family is available for SRAM DUB (29 mm), 30 mm cranks; choose the matching spindle in the variant. Enduro Bearings offers a solution for almost every combination of frame and crank at several price and performance levels, from ABEC-3 to XD-15 ceramic.
Facts: Enduro Bearings "Double Row BB86/92 Stainless" MTB Bottom Bracket
- Material: bearings 440C stainless steel (balls and races)
- Style: press fit BB86/BB92 (41 mm shell bore)
- Axle Diameter: 29mm or 30mm
- Bearings: double row flanged bearings (twice the number of balls per side), pressed directly into the shell
- Distance Tube: center sleeve kit
- Scope of Delivery: 2 double row flanged bearings, center sleeve kit, outer seals, spacers, aluminium preload adjuster; no tools
- Extras:
- 3 year anti-corrosion guarantee (manufacturer)
- according to Enduro stainless has about 20 % less load capacity than chromium steel and is the better choice in wet conditions and for bikes that are washed often
- replacement bearings sold individually: DRF 3041 2RS SS (30 mm cranks), DRF 2941 2RS SS (SRAM DUB)
- installation tools named by the manufacturer: BRT-060-MH, BRT-040-30MM, BRT-040-BB86/92, BRT-040-29MM
- Enduro part numbers: BKS-7016, BKS-7015
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
