Ikon "UD Carbon" BMX Race Rim - 24 Inch (507) - 36H - V-Brake
- Weight : 0.44kg / 0.97lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 45130
- Product safety
- Note carbon rim notice
Weight
Source: BMX Glossary
Printed: 10/29/2026
The Ikon "UD Carbon" BMX Race Rim - 24 Inch (507) - 36H - V-Brake is Ikon's carbon rim with 36 holes for 24 x 1.50" to 1.75" cruiser wheels, meaning a 507mm bead seat diameter. It is made of unidirectional Toray T700 carbon, which Ikon says is stronger than common 3K weaves. It weighs 433g. The aero profile is 30mm wide and 30mm high, the nipple holes are angled.
The sidewalls have a brake track, so this is Ikon's rear profile for V-brakes. On a carbon rim you must use special carbon brake pads. It is tested by the Chase race team. Ikon recommends at most 7.58 bar (110 psi) and a spoke tension up to 115 kgf.
Facts: Ikon "UD Carbon" BMX Race Rim - 24 Inch (507) - 36H - V-Brake
- Wheel Size: 24"
- Material: Toray T700 UD carbon
- Holes: 36H
- Width: 30mm outer, 24mm inner
- Height (Rim Wall): 30mm
- ETRTO ⌀: 507mm
- ERD: 466.4mm
- Rim Wall: with brake track for V-brakes, rear, carbon brake pads only
- Valve Hole Diameter: for Presta valve
- Extras: 24 x 1.50" to 1.75", max. 7.58 bar (110 psi), spoke tension up to 115 kgf, angled nipple holes
Carbon rim notice
On carbon rims, single layers of the laminate can crack, usually from hard landings or overloading. Such damage from use is not a defect: it is covered neither by the statutory warranty nor by any manufacturer's warranty. A rim with cracked layers should be checked before it is ridden again.
Our recommendation: carbon rims are best suited to experienced, professional use. Front wheel rather than rear, and park, dirt or race rather than street. Land clean and you keep the weight advantage for longer. Worth being aware of.
