Novatec "D041SB" MTB Front Hub
- Weight : 0.21kg / 0.46lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 39971
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/novatec-d041sb-mtb-front-hub-p-39971
Printed: 11/07/2026
Printed: 11/07/2026
The Novatec "D041SB" MTB Front Hub is Novatec's front hub for disc brakes on the classic quick release standard. It is built for 100 mm hub spacing and takes a 5 mm quick release, which is not included. The rotor bolts on through the 6-bolt mount. Two sealed industrial bearings run in the hub shell, flange to flange is 62 mm at a 58 mm pitch circle. Available with 32 and 36 spoke holes, 210 g without quick release.
Facts: Novatec "D041SB" MTB Front Hub
- Holes: 32H
- Axle Standard: QR x 100 mm
- Disc Mount: 6-bolt
- Bearings: sealed (SB)
- Scope of Delivery: 1 hub
- Extras:
- 2 sealed industrial bearings
- hollow axle for a 5 mm quick release, quick release not included
- pitch circle diameter (PCD) 58 mm, flange to flange (FTF) 62 mm
- lock nut to left flange 26.2 mm, right flange to lock nut 11.8 mm
- 210 g
