Praxis Works "M30" MTB Bottom Bracket Replacement Bearing Kit
-
Weight : 0.12kg / 0.26lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 40342
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Praxis Works "M30" MTB Bottom Bracket Replacement Bearing Kit is the bearing kit to rebuild a Praxis M30 bottom bracket instead of replacing it. It contains the two steel cartridge bearings, 30mm for the drive side and 28mm for the non-drive side. It fits the M30 bottom brackets for BSA, T47 and BB30/PF30, not the M30 press fit for BB86/90/92, which cannot be rebuilt. Pulling and pressing the bearings needs a shop grade bearing tool.
Facts: Praxis Works "M30" MTB Bottom Bracket Replacement Bearing Kit
- Material: steel
- Style: replacement bearings for Praxis M30 bottom brackets
- Axle Diameter: 30mm
- Bearings: steel cartridge bearings, 30mm drive side, 28mm non-drive side
- Scope of Delivery: 2 bearings, shown with circlip on the manufacturer photo
- Extras:
- fits Praxis M30 BSA, T47 E.B., T47 Asym and BB30/PF30
- not for the M30 press fit bottom bracket BB86/90/92
- remove and install only with a bearing puller and press, the wrong tool damages bearings and bottom bracket
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
