Spank "350" MTB Rim - 27.5" Inch
-
Weight : 0.5kg / 1.10lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 33186
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Spank "350" MTB Rim - 27.5" Inch is the rim Spank started its radially compliant range with, here without the Vibrocore foam core and therefore around 60 grams lighter than the Vibrocore version. Profile and geometry are the same, 17mm shallow and wide enough at 30.5mm inner width for tyres from 2.0" to 2.6". The profile gives radially and stays laterally stiff, taking the edge off impacts while still steering cleanly. Spank intends it for all mountain, trail and enduro, and it runs tubeless with the BeadBite rim hook, rim tape and a valve.
Facts: Spank "350" MTB Rim - 27.5" Inch
- Wheel Size: 27.5"
- Material: Dynamal alloy
- Seam: Sleeved
- Holes: 32H
- Width: 30.5mm inner, 35mm outer
- Height (Rim Wall): 17mm
- Valve Hole Diameter: for Presta valve
- Contains: 1 rim
- Extras:
- tubeless ready
- BeadBite rim hook against burping
- OohBah inverted inner wall
- shotpeen finish
- ETRTO 584x30.5
- ERD 564mm++ (Spank measures without the nipple head, add twice the nipple head height)
- recommended tyre width 2.0" to 2.6"
- Spank recommends nipple washers
- for all mountain, trail and enduro
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
