Spank "359" MTB Rim - 27.5" Inch
- Weight : 0.51kg / 1.12lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 33188
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Spank "359" MTB Rim - 27.5" Inch is Spank's gravity rim without the Vibrocore foam core, intended for enduro, freeride and downhill. The profile is 19mm deep and at 30.5mm inner width wide enough for tyres from 2.0" to 2.6" to stand up properly instead of rolling over in a corner. The rim gives radially in a controlled way and stays laterally stiff, taking impacts out of the ground while holding a line. The BeadBite rim hook interlocks with the tyre bead and prevents burping at low pressure. The rim profile is symmetrical and it is built tubeless.
Facts: Spank "359" MTB Rim - 27.5" Inch
- Wheel Size: 27.5"
- Material: Aluminium
- Seam: Sleeved
- Holes: 32H
- Width: 30.5mm inner, 35mm outer
- Height (Rim Wall): 19mm
- Valve Hole Diameter: for Presta valve
- Contains: 1 rim
- Extras:
- tubeless ready
- BeadBite rim hook against burping
- OohBah inverted inner wall
- symmetrical rim profile
- ETRTO 584x30.5
- ERD 560mm++ (Spank measures without the nipple head, add twice the nipple head height)
- recommended tyre width 2.0" to 2.6"
- ASTM 5, for all mountain, trail, enduro, freeride and DH
MTB Wheels + Co. - Newest Products
e*thirteen "Grappler Sidekick Pro GR Flux 66 Enduro Carbon" MTB Rear Wheel - 27.5"
1.09 kg
979.95 EUR
