Wolf Tooth "PowerTrac Elliptical" MTB Chainring - Shimano Direct Mount
- Weight : 0.07kg / 0.15lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 36499
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/wolf-tooth-powertrac-elliptical-mtb-chainring-shimano-direct-mount-p-36499
Printed: 11/02/2026
Printed: 11/02/2026
Wolf Tooth "PowerTrac Elliptical" MTB Chainring - Shimano Direct Mount is the oval version of the Wolf Tooth chainring: 10 percent ovality, the biggest gear 112 degrees after top dead centre, right where your leg has the most power. The patented Drop-Stop profile keeps the chain without a guide, the ring is machined in Minnesota from 7075-T6 aluminium. The largest diameter equals a round ring with two more teeth. This version fits the Shimano 12 speed direct mount cranks and carries the Drop-Stop ST profile for the Hyperglide+ chain; the 32 tooth Boost version is also available with Drop-Stop B for SRAM chains.
Facts: Wolf Tooth "PowerTrac Elliptical" MTB Chainring - Shimano Direct Mount
- Style: 1x chainring, oval (PowerTrac); 0mm offset (chainline like the stock Shimano chainring), Drop-Stop ST, Boost (3mm offset), Drop-Stop B or Boost (3mm offset), Drop-Stop ST
- Material: 7075-T6 aluminium, CNC machined
- Teeth: 34T, 30T, 32T or 36T
- Chainring Mount: Direct Mount (Shimano)
- Chain Compatibility: see style. Drop-Stop ST: 12 speed Shimano Hyperglide+ and 12 speed KMC only. Drop-Stop B: SRAM chains (Eagle, T-Type Transmission), all 9, 10 and 11 speed chains, not for Shimano Hyperglide+
- Contains: 1 chainring
- Extras:
- oval (PowerTrac), 10 percent ovality, timing 112 degrees after top dead centre; largest diameter like a round ring with 2 more teeth, check chainstay clearance
- for Shimano 12 speed direct mount cranks XTR M9100, XT M8100 and SLX M7100
- 0mm offset and Boost version with 3mm offset, the offset matches the stock Shimano chainring in each case (manufacturer)
- weight according to the manufacturer: 32T 65g
- the manufacturer recommends a clutch rear derailleur
- made in USA
