Wolf Tooth "ReMote Pro" Conversion Kit
- Weight : 0.01kg / 0.02lbs
- Packaging Unit: 1 Set
- Product ID (PID): 39695
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/wolf-tooth-remote-pro-conversion-kit-p-39695
Printed: 11/07/2026
Printed: 11/07/2026
The Wolf Tooth "ReMote Pro" Conversion Kit moves an existing ReMote Pro to a different brake: the lever stays, only the mount is swapped. The kit comes for Magura, Hayes Dominion, Hope Tech 4, Shimano I-Spec B, I-Spec EV and I-Spec II as well as SRAM MatchMaker X, each with the matching mounting hardware. With the Magura version the gap sits at the top of the clamp, which is intended and creates a hard joint under the lever. Fits the ReMote Pro only, not the ReMote or the ReMote Light Action.
Facts: Wolf Tooth "ReMote Pro" Conversion Kit
- Type: conversion kit (mount) for dropper remote lever
- Material: Aluminum
- Fits: Wolf Tooth ReMote Pro; brake per version: Magura (all current models except Gustav), Hayes Dominion, Hope Tech 4, Shimano I-Spec B (XT M780, SLX M670, Deore M615, XTR M980/M985, Zee M640), Shimano I-Spec EV (XTR M9100/M9120, XT M8100/M8120, SLX M7100/M7120, Deore M6100/M6120, M4100/M4120), Shimano I-Spec II (XTR M9000/M9020, Saint M820, XT M8000/M8020, SLX M7000, Deore M6000) or SRAM MatchMaker X; 22.2 mm handlebar clamp version: mounts directly to the bar instead of the brake
- Contains: 1 mount with mounting hardware
- Extras:
- Magura: the gap at the top of the clamp is intended
- not for ReMote and ReMote Light Action
- part no. 120-127 in the manufacturer parts diagram (Right to Repair)
