Enduro Bearings "WA 22x24x11.5F" MTB Bottom Bracket GXP Adapter
-
Weight : 0.12kg / 0.26lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 40128
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "WA 22x24x11.5F" MTB Bottom Bracket GXP Adapter turns a 24 x 37 mm non drive side bearing into a seat for the 22 mm spindle end of a SRAM GXP crank, so a bottom bracket for 24 mm spindles can be used with a GXP crank.
Facts: Enduro Bearings "WA 22x24x11.5F" MTB Bottom Bracket GXP Adapter
- Material: aluminium
- Style: type 1 GXP adapter with 3.5 mm flange, 22 x 24 x 11.5 mm
- Axle Diameter: inside 22 mm (SRAM GXP), outside 24 mm
- Scope of Delivery: 1 adapter
- Extras:
- converts a 24 x 37 mm non drive side bearing to SRAM GXP cranks
- Enduro part number WA 22x24x11.5F
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
