Enduro Bearings "WA Wave" MTB Wave Washer
-
Weight : 0.12kg / 0.26lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 40125
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "WA Wave" MTB Wave Washer made of spring steel removes the last bit of play from a bottom bracket or hub axle and ensures the bearings are properly loaded. The light version suits radial bearings, Enduro recommends the heavy 0.6 mm washer for angular contact bearings.
Facts: Enduro Bearings "WA Wave" MTB Wave Washer
- Material: spring steel
- Style: 17 mm, 0.3 mm light (hub), 24 mm, 0.4 mm light, 24 mm, 0.6 mm heavy or 30 mm, 0.6 mm heavy
- Axle Diameter: inner diameter 17, 24 or 30 mm, see version
- Scope of Delivery: 1 wave washer
- Extras:
- removes the last bit of play from the spindle and ensures proper bearing preload
- Enduro recommends 0.6 mm (heavy) for angular contact bearings
- 17 mm for hub axles: 17 x 21 x 0.3 mm, approx. 40 N at 3 mm deflection (manufacturer)
- Enduro part numbers: WA Wave 24/0.4, WA Wave 24/0.6, WA Wave 30/0.6, WA Wave 17/0.3
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
