Enduro Bearings "MAXHit" MTB Headset - ZS44/28.6 | ZS56/40
-
Weight : 0.08kg / 0.18lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 40111
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "MAXHit" MTB Headset - ZS44/28.6 | ZS56/40 is Enduro's MAXHit headset for 1-1/8 to 1.5 inch tapered steerers, zero stack 44 mm upper, ZS56/40 lower (zero stack upper and lower). With MAXHit the bearing itself is the cup: it presses directly into the head tube, the aluminium cup is gone and there is room for much larger balls. Everything is machined from 440C stainless steel, and Enduro backs it with a lifetime warranty.
Facts: Enduro Bearings "MAXHit" MTB Headset - ZS44/28.6 | ZS56/40
- Material: 440C stainless steel, fully machined (bearing and cup are one part)
- Size: 1-1/8" - 1.5" (28.6mm - 38.1mm), ZS44/28.6 | ZS56/40 (zero stack upper and lower), total stack 10.2 mm (upper 6.5 mm, lower 3.7 mm)
- Bearing: MAXHit angular contact bearings pressed directly into the head tube, 36° inner chamfer upper and lower, double lip labyrinth seals, extra high pressure grease
- Scope of Delivery: upper and lower MAXHit bearing, fork crown race, upper split ring, upper bearing cap, hidden top cap preload adjuster
- Extras:
- lifetime manufacturer warranty
- use only as a complete system (cap, compression ring, both bearings, crown race), then differing original angles do not matter
- no aluminium cups, leaving room for larger balls with, according to the manufacturer, more than double the load capacity
- Enduro part number: HDK-0010
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
