Cane Creek "Helm MKII Coil" MTB Fork - 27.5 Inch
- Weight : 2.34kg / 5.16lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 46149
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/cane-creek-helm-mkii-coil-mtb-fork-275-inch-p-46149
Printed: 11/04/2026
Printed: 11/04/2026
The Cane Creek "Helm MKII Coil" MTB Fork - 27.5 Inch is Cane Creek's versatile mountain bike fork for downcountry, trail and enduro. Updated MKII damper and seals make it very plush, independent high- and low-speed compression add support for big hits without losing sensitivity, and every click is a meaningful change. The chassis with 35 mm stanchions is stiff enough for aggressive riding. The coil spring gives the best sensitivity and a ground-hugging feel, a 55 lb spring is fitted from factory. Travel changes at home in 10 mm steps with no additional parts.
Facts: Cane Creek "Helm MKII Coil" MTB Fork - 27.5 Inch
- Wheel Size: 27.5"
- Travel: 140mm, 150mm or 160mm
- Offset (Rake): 44mm
- Damping: high-speed compression (10 positions), low-speed compression (17 positions), low-speed rebound (10 positions)
- Spring System: Coil, 55 lbs/in lightweight spring from factory; 35, 45, 55, 65 lbs/in available; spring preload adjust
- Rebound: low-speed rebound externally adjustable, 10 positions
- Steerer Tube Diameter: 1-1/8" - 1.5" (28.6mm - 38.1mm)
- Axle Type: D-Loc 15 mm bolt-on thru axle, Boost 15 x 110 mm
- Stanchions: 35 mm
- Max. Rotor Size: min. 180 mm, Post Mount 7 inch (Hope Tech: 200 mm with adapter)
- Travel Adjustment: internal in 10 mm steps from 160 down to 130 mm
- Recommended Use: downcountry, trail, enduro
- Contains: 1 fork
- Extras: max. tyre 75 mm wide, 739 mm tall; matte black finish with gloss black decals; weight 2340 g (manufacturer); hand built and individually dyno tested in North Carolina, USA
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
