Microshift "Marvo" MTB Front Derailleur
- Weight : 0.15kg / 0.33lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 43753
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Microshift "Marvo" MTB Front Derailleur is a front derailleur for double cranks on 9-speed drivetrains. The clamp fits 34.9 mm seat tubes, with the adaptor also 31.8 mm, and the cable can come from above or below (dual pull). It takes large chainrings from 34 to 42 teeth with 14 teeth of capacity and works with a 48.8 mm chainline or Boost 51.8 mm. The shifting plate is forged steel, the outer link aluminium. Fits Shimano compatible MTB shifters for 2x.
Facts: Microshift "Marvo" MTB Front Derailleur
- Version: front derailleur, 2x (double)
- Speeds: 9-speed
- Compatibility: Shimano compatible MTB 2x shifters, largest chainring 34-42 teeth, capacity 14 teeth, chainline 48.8 mm or Boost 51.8 mm, chainstay angle 66-69 degrees
- Mounting: band clamp 34.9 mm, with adaptor for 31.8 mm, cable from above or below (dual pull)
- Material: shifting plate forged steel, outer link aluminium
- Weight: 154 g
- Contains: 1 front derailleur
- Extras: dual pull cable routing
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
