Silca "3DP UDH" Titanium Derailleur Hanger
-
Weight : 0.11kg / 0.24lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 37215
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Silca "3DP UDH" Titanium Derailleur Hanger is the 3D printed titanium derailleur hanger for frames with a UDH dropout: two to seven times stiffer than the aluminium plate that flexes up to 4 degrees under an electronic derailleur, according to Silca, and 2 to 6 g lighter. The Direct Mount version replaces the B-link of Shimano derailleurs, gives 8 to 12 times the stiffness and saves 4 to 10 g. Every hanger is verified to 0.2 degrees of parallelism; do not bend it with an alignment tool, titanium resists cold-bending, and the fracture notch protects the frame in a hard impact. For 12 x 1.0 thru axles.
Facts: Silca "3DP UDH" Titanium Derailleur Hanger
- Fits: frames with UDH dropout, 12 x 1.0 thru axle; Standard for conventional derailleurs, Direct Mount for Shimano direct mount derailleurs (replaces the B-link)
- Version: Direct Mount (Shimano) or Standard
- Material: titanium, 3D printed
- Contains: 1 derailleur hanger
- Extras:
- Standard 5 to 7x stiffer and 2 to 6 g lighter than aluminium
- Direct Mount 8 to 12x stiffer and 4 to 10 g lighter
- frame saving fracture notch
- verified to 0.2 degrees, do not realign
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
