Microshift "Mezzo" MTB Front Derailleur
-
Weight : 0.14kg / 0.31lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 35914
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Microshift "Mezzo" MTB Front Derailleur is a front derailleur for triple cranks on 7- and 8-speed drivetrains as fitted to kids and entry-level MTBs. The clamp fits 34.9 mm seat tubes, adaptors for 31.8 and 28.6 mm are included, and the cable can come from above or below (dual pull). It takes chainrings up to 42 teeth with 18 teeth of capacity, so the classic 42-34-24 crank, and fits any Shimano compatible triple shifter such as the Mezzo Thumb Tap.
Facts: Microshift "Mezzo" MTB Front Derailleur
- Version: front derailleur, 3x (triple)
- Speeds: 7-speed or 8-speed
- Compatibility: Shimano MTB 7- and 8-speed shifters, chainrings 42-34-24 teeth, largest chainring 42 teeth, capacity 18 teeth, chainline 47.5 or 50 mm, chainstay angle 66-69 degrees
- Mounting: band clamp 34.9 mm, with adaptors for 31.8 and 28.6 mm, cable from above or below (dual pull)
- Material: aluminium (parallelogram), steel (cage)
- Weight: 143 g
- Contains: 1 front derailleur with clamp adaptors
- Extras: dual pull cable routing
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
