Ryde "Disc 35" MTB Rim - 29" Inch
-
Weight : 0.66kg / 1.46lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 36960
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Ryde "Disc 35" MTB Rim - 29" Inch is Ryde's wide off road rim: a pinned double wall rim made of 6106-T6 aluminium, black anodised, with 35mm internal width for tyres from 57 to 76mm. The 32 spoke holes carry black eyelets, the valve hole is drilled for Presta valves, the rim is tubeless ready and meant for disc brakes only. Ryde rates it for MTB and e-MTB up to 25 km/h with a 90kg axle load. For plus tyres from 2.6 inch on trail and enduro wheels in 29 inch.
Facts: Ryde "Disc 35" MTB Rim - 29" Inch
- Wheel Size: 29"
- Material: 6106-T6 aluminium, double wall, anodised
- Seam: Pinned
- Holes: 32H
- Width: 35mm internal, 39.4mm external
- Height (Rim Wall): 17.5mm
- Rim Wall: no brake track, disc brake only
- Valve Hole Diameter: 6.5mm for Presta valve
- Contains: 1 rim
- Extras:
- tubeless ready
- hooked rim (crotchet)
- single eyelets (black)
- French drilling pattern (staggered holes)
- max. spoke tension 1200N
- recommended tyre width 57mm to 76mm
- axle load up to 90kg
- ERD 603mm (maker figure)
- use as rated by Ryde: MTB, e-bike 25 km/h; ATB, city, touring and e-bike 45 km/h with limits
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
