FOX "Mounting Hardware" Shock Eyelet Bushing Kit
-
Weight : 0.03kg / 0.07lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 40176
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The FOX "Mounting Hardware" Shock Eyelet Bushing Kit is the mounting hardware for one eyelet of a FOX rear shock: two flanged bushings are pressed into the shock eyelet, a hollow pin goes through them and is centred by black Delrin spacers on either side. Thin O-rings between the spacers and the bushings keep dirt out and prevent premature bushing wear. Choose pin diameter and mount width to match the bolt and the shock mount of your frame in the variant.
Facts: FOX "Mounting Hardware" Shock Eyelet Bushing Kit
- Fits: FOX rear shocks with a bushing eyelet; pin diameter and mount width have to match the bolt and the shock mount of the frame
- Version: Mount width 38.61 mm, 8 mm bolt or Mount width 41.15 mm, 6 mm bolt
- Material: pin aluminium, spacers Delrin
- Contains: hardware for one shock eyelet: 2 flanged bushings, 1 hollow pin, 2 spacers, 2 O-rings
- Part number: FOX 803-03-275 (6 mm x 41.15 mm, pin 214-08-023), 803-03-300 (8 mm x 38.61 mm, pin 214-09-028)
- Extras: the second shock mount needs its own kit
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
