Silca "3DP" Titanium Pedal Cleats
-
Weight : 0.03kg / 0.07lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 37209
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Silca "3DP" Titanium Pedal Cleats are 3D printed titanium MTB cleats with an internal lattice that weigh half of the steel or brass cleats that come with the pedals: 22 to 24 g per set, 24 to 30 g saved, and four times the life of brass according to Silca. For Shimano SPD, Crank Brothers and Time ATAC, with titanium hardware. Grease threads and screw heads, torque up to 10 Nm on hard carbon soles and re-tighten after the first ride.
Facts: Silca "3DP" Titanium Pedal Cleats
- Fits: Shimano SPD (4 degree float, single release), Crank Brothers (6 degree float, 15 degree release), Time ATAC (5 degree float, 10 degree release)
- Material: titanium, 3D printed, 6Al/4V titanium hardware
- Contains: 1 set of cleats with hardware
- Version: Crank Brothers, Shimano SPD or Time ATAC
- Extras:
- Shimano SPD 24 g, Crank Brothers 22 g, Time 22 g per set
- half the weight of stock cleats
- 4x life expectancy of brass
- printed in Indianapolis
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
